View B39182B8656P810_8387778.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

saw components saw duplexer lte / e-utra band 3 series/type: ordering code: b8656 B39182B8656P810 date: version: november 17, 2014 2.1 ? epcos ag 2015. reproduction, publicati on and dissemination of this publicatio n, enclosures hereto and the information contained therein without epcos' pr ior express consent is prohibited. epcos ag is a tdk group company.
2 november 17, 2014 b8656 1747.5 / 1842.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer datasheet application n low-loss saw duplexer for mobile telephone lte / e-utra band 3 systems n low insertion attenuation n low amplitude ripple n usable passband 75 mhz n single ended to balanced transformation in antenna - rx path n impedance transformation 50 w to 100 w in antenna - rx path n high tx - rx isolation n optimized for envelope tracking features n package size 1.8 x 1.4 mm 2 n package height 0.475mm max. n rohs compatible n approximate weight 4.2mg n package for s urface m ount t echnology ( smt ) n ni, gold-plated terminals n e lectrostatic s ensitive d evice ( esd ) n m oisture s ensitive l evel 3 bottom view top view side view 0.3 4 0.35 0.25 0.25 8 4 8 1.4 1.8 123 6 5 75 6 123 7 0.475 max. 0.7 pin configuration n 3 tx input n 1, 8 rx output (balanced) n 6 antenna n 2, 4, 5, 7 to be grounded
3 november 17, 2014 b8656 1747.5 / 1842.5 mhz saw components saw duplexer datasheet please read cautions and warnings and important notes at the end of this document. characteristics temperature range for specification: t = C30 ?c to +85 ?c ant terminating impedance: z ant =50 w|| 3.3 nh rx terminating impedance: z rx = 100 w ( balanced) +1.5 nh || 16 nh 4) tx terminating impedance: z tx =50 w characteristics tx-ant 1) min. typ. @ 25?c max. center frequency f c C 1747.5 C mhz maximum insertion attenuation a max 1712.5 ... 1782.5 mhz a lte 2)3) C 2.0 3.0 db 1712.5 ... 1782.5 mhz a lte 2) C 2.0 3.5 db amplitude ripple per 5mhz channel da 1710.24 ... 1784.76 mhz C 0.6 C db input vswr (tx port) 1710.24 ... 1784.76 mhz 3) C 1.4 2.0 1710.24 ... 1784.76 mhz C 1.4 3.2 output vswr (ant port) 1710.24 ... 1784.76 mhz 3) C 1.5 2.0 1710.24 ... 1784.76 mhz C 1.5 2.2 attenuation a 10.0 ... 1565.42 mhz 36 39 C db 703.0 ... 748.0 mhz 40 46 C db 716.0 ... 756.0 mhz 40 46 C db 814.0 ... 849.0 mhz 39 44 C db 824.0 ... 849.0 mhz 39 44 C db 830.0 ... 845.0 mhz 39 44 C db 832.0 ... 862.0 mhz 39 43 C db 880.0 ... 915.0 mhz 38 42 C db 925.0 ... 960.0 mhz 38 42 C db 1226.0 ... 1250.0 mhz 36 39 C db 1496.0 ... 1511.0 mhz 40 47 C db 1559.0 ... 1563.0 mhz 38 46 C db 1565.42 ... 1573.374mhz 37 44 C db 1573.374... 1577.466mhz 36 43 C db 1577.466... 1585.42 mhz 35 42 C db 1597.5515...1605.886mhz 33 39 C db 1605.886... 1680.0 mhz 20 34 C db 1805.24 ... 1879.76 mhz 3) 44 55 C db 1805.24 ... 1879.76 mhz 40 55 C db 1807.5 ... 1877.5 mhz a lte 2) 44 55 C db
4 november 17, 2014 b8656 1747.5 / 1842.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer datasheet 1920.0 ... 1980.0 mhz 24 32 C db 2110.0 ... 2170.0 mhz 24 33 C db 2400.0 ... 2500.0 mhz 26 30 C db 2440.0 ... 2494.0 mhz 26 30 C db 2500.0 ... 2570.0 mhz 25 30 C db 2620.0 ... 2690.0 mhz 24 29 C db 3420.0 ... 3570.0 mhz 21 24 C db 4900.0 ... 5950.0 mhz 12 22 C db 5100.0 ... 5385.0 mhz 12 25 C db 5130.0 ... 5355.0 mhz 12 25 C db 6840.0 ... 7140.0 mhz C 23 C db 8550.0 ... 8925.0 mhz C 24 C db 10260.0 ... 10710.0 mhz C27C db 11970.0 ... 12495.0 mhz C 35 C db 1) specified values are valid for a testing power of +10dbm 2) averaged value of linear s-parameter over 5 mhz 3) valid in the temperature range from 0?c to 85?c 4) alternative matching 140 w (balanced) ||10 nh characteristics tx-ant 1) min. typ. @ 25?c max.
5 november 17, 2014 b8656 1747.5 / 1842.5 mhz saw components saw duplexer datasheet please read cautions and warnings and important notes at the end of this document. characteristics temperature range for specification: t = C30 ?c to +85 ?c ant terminating impedance: z ant =50 w|| 3.3 nh rx terminating impedance: z rx = 100 w( balanced) +1.5 nh || 16 nh 4) tx terminating impedance: z tx =50 w characteristics ant-rx 1) min. typ. @ 25?c max. center frequency f c C 1842.5 C mhz maximum insertion attenuation a max 1807.5 ... 1877.5 mhz a lte 2)3) C 2.8 3.5 db 1807.5 ... 1877.5 mhz a lte 2) C 2.8 3.8 db amplitude ripple per 5mhz channel da 1805.24 ... 1879.76 mhz C 0.7 C db common mode rejection ratio 1805.24 ... 1879.76 mhz 18 23 C db input vswr (ant port) 1805.24 ... 1879.76 mhz C 1.7 2.0 output vswr (rx port) 1805.24 ... 1879.76 mhz C 1.6 2.0 attenuation a 10.0 ... 1710.0 mhz 40 50 C db 95.0 mhz 50 70 C db 718.0 ... 748.0 mhz 40 70 C db 814.0 ... 849.0 mhz 40 70 C db 832.0 ... 862.0 mhz 40 70 C db 880.0 ... 915.0 mhz 40 68 C db 1447.0 ... 1463.0 mhz 40 52 C db 1615.0 ... 1690.0 mhz 40 50 C db 1710.24 ... 1784.76 mhz 45 53 C db 1712.5 ... 1782.5 mhz a lte 2) 45 53 C db 1785.0 ... 1790.0 mhz 10 55 C db 1920.0 ... 2000.0 mhz 32 46 C db 2000.0 ... 2400.0 mhz 38 44 C db 2400.0 ... 2500.0 mhz 40 50 C db 2500.0 ... 2570.0 mhz 40 49 C db 2570.0 ... 3515.0 mhz 40 45 C db 3515.0 ... 3760.0 mhz 40 46 C db 3760.0 ... 6000.0 mhz 36 44 C db
6 november 17, 2014 b8656 1747.5 / 1842.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer datasheet 4900.0 ... 5950.0 mhz 36 44 C db 5205.0 ... 5660.0 mhz 36 45 C db 6000.0 ... 13025.0 mhz C 39 C db 7220.0 ... 7520.0 mhz C 47 C db 9025.0 ... 9400.0 mhz C 39 C db 10830.0 ... 11280.0 mhz C 43 C db 12635.0 ... 13160.0 mhz C 47 C db 1) specified values are valid for a testing power of +10dbm 2) averaged value of linear s-parameter over 5 mhz 3) valid in the temperature range from 0?c to 85?c 4) alternative matching 140 w (balanced) ||10 nh characteristics ant-rx 1) min. typ. @ 25?c max.
7 november 17, 2014 b8656 1747.5 / 1842.5 mhz saw components saw duplexer datasheet please read cautions and warnings and important notes at the end of this document. characteristics temperature range for specification: t = C30 ?c to +85 ?c ant terminating impedance: z ant =50 w|| 3.3 nh rx terminating impedance: z rx = 100 w ( balanced) + 1.5 nh || 16 nh 3) tx terminating impedance: z tx =50 w characteristics tx-rx 1) 1) specified values are valid for a testing power of +10dbm min. typ. @ 25?c max. isolation a 1712.5 ... 1782.5 mhz a lte 2) 2) averaged value of linear s-parameter over 5 mhz 3) alternative matching 140 w (balanced) ||10 nh 54 59 C db 1807.5 ... 1877.5 mhz a lte 2) 53 60 C db maximum ratings storage temperature range t stg C40/+90 ?c dc voltage v dc 0 1) 1) dc resistance at rx output might be less than 100 m w at elevated temperatures. hence, we recommend usage of blocking capacitors. v esd voltage v esd 50 2) 2) acc. to jesd22-a115b (machine model), 10 negative & 10 positive pulses. v machine model v esd 300 3) 3) acc. to jesd22-a114f (human body model), 1 negative & 1 positive pulses. v human body model v esd 500 4) 4) acc. to jesd22-c101c (charge device model), 3 negative & 3 positive pulses. v charge device model input power p in 29 dbm 5 mhz lte uplink @ 50?c, 5000h 1712.5 ... 1782.5 mhz
8 november 17, 2014 b8656 1747.5 / 1842.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer datasheet frequency response tx - ant
9 november 17, 2014 b8656 1747.5 / 1842.5 mhz saw components saw duplexer datasheet please read cautions and warnings and important notes at the end of this document. frequency response ant - rx
10 november 17, 2014 b8656 1747.5 / 1842.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer datasheet wide band frequncy response tx - ant and ant - rx
11 november 17, 2014 b8656 1747.5 / 1842.5 mhz saw components saw duplexer datasheet please read cautions and warnings and important notes at the end of this document. frequency response tx - rx rx common mode rejection ratio
12 november 17, 2014 b8656 1747.5 / 1842.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer datasheet vswr of tx-port, rx-port and ant-port
13 november 17, 2014 b8656 1747.5 / 1842.5 mhz saw components saw duplexer datasheet please read cautions and warnings and important notes at the end of this document. references type b8656 ordering code B39182B8656P810 marking and package c61157-a8-a92 packaging f61074-v8259-z000 date codes l_1126 s-parameters b8656_nb_un.s4p (narrow band, unmatched), b8656_wb_un.s4 (wide band, unmatched), b8656_hd_wb_un.s4p (hd wide band, unmatched) see file header for port/pin assignment table soldering profile s_6001 rohs compatible rohs-compatible means that products are compatible with the requirements according to art. 4 (substance restrictions) of di- rective 2011/65/eu of the european parliament and of the council of june 8 th , 2011, on the restriction of the use of cer- tain hazardous substances in electrical and electronic equip- ment ("directive") with due regard to the application of exemp- tions as per annex iii of the directive in certain cases. moldability before using in overmolding environment, please contact your epcos sales office. matching coils see inductor pdf-catalog http:// www .tdk.co.jp/tefe02/coil.htm#aname1 and data library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm for further information please contact your local epcos sales office or visit our webpage at w ww.epcos.com . published by epcos ag systems, acoustics, waves business group p.o. box 80 17 09, 81617 munich, germany ? epcos ag 2014. this brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of epcos ag or t he international representatives. due to technical requirements components may contain dangerous substances. for information on t he type in question please also contact one of our sales offices.
14 november 17, 2014 important notes t he following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-speci?c products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, ceralink, ceraplas, csmp, cssp, ctvs, deltacap, digisimic, dssp, filtercap, formfit, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineformer, siov, sip5d, sip5k, tfap, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.

▲Up To Search▲

Price & Availability of B39182B8656P810

	To Download B39182B8656P810 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .